+8615333827088 15333827088@163.com
EN|ES|RU|FR
U
UPSEN
CRUSHING & SCREENING
Full UPSEN product catalogue — 35 pages, all models & specsDownload Catalogue (PDF)
Home / Mobile Conveyor

Mobile Conveyor - Tracked Stacker Conveyor Equipment

4 Models Available

Tracked Mobile Conveyors That Close the Crushing Line

A crusher or screener only earns while it is running — and it only runs when the finished material is moving away. UPSEN tracked mobile conveyors take crushed and screened product straight from the discharge point and stack it in clean stockpiles, cutting loader cycles and hauling on every job.

The four models on this page move 100-500 t/h with belt widths from 800 to 1200 mm. They are self-propelled on tracks with wireless remote control — reposition them in minutes as the stockpile grows, with no fixed foundations and no waiting on trucks. Powered by Cummins diesel engines and built to the same CE-certified standard as our crushers, screeners and shredders.

Stockpiling Plant Transfer Quarry & Aggregate Recycling Lines

Quick Selection Guide by Capacity

  • 100-300 t/hCompact lines and transfer duties — UTD35
  • 200-300 t/hStandard crusher / screener pairing — UTD40S, UTD65
  • 300-500 t/hHigh-volume stockpiling — UTD65S

Tell us what feeds the conveyor (crusher, screener or loader) and the stockpile height you need — we will spec the right boom and belt.

Ask Carlsen on WhatsApp

Conveyor (4 Models)

UTD35
View Details

UTD35

100-300 t/h 15-30 kW Diesel -
UTD40S
View Details

UTD40S

200-300 t/h Cummins 54 kW 5.5 tons
UTD65
View Details

UTD65

200-300 t/h Cummins 54 kW 6.8 tons
UTD65S
View Details

UTD65S

300-500 t/h Cummins 93 kW 8.5 tons

Why a Tracked Conveyor — Not a Loader or Fixed Stacker

Every hour a wheel loader spends shuttling material is an hour it is not feeding your crusher. A mobile conveyor does the moving so your loader and trucks do the earning.

1

Cut loader cycles
Product leaves the discharge point continuously — the loader stays on the crusher hopper.

2

No foundations, no permits
Tracked units reposition in minutes as the pile grows — fixed stackers need concrete and planning.

3

Higher, cleaner stockpiles
Dedicated stackers build larger, well-separated piles than loader push-ups — less re-handling and re-blending.

4

Moves with your plant
From job to job with the crusher and screener — one tracked fleet, no disassembly.

Standard process: crusher or screener discharge → tracked conveyor → clean stockpile. Want to see the whole line? View our crushers, screeners and shredders.

Applications & Model Selection Guide

Match the conveyor to the plant it serves. Rated capacity depends on belt width, angle and material density — our engineers confirm the configuration for your plant layout.

Application Recommended Models Capacity Range Typical Setup
Compact crushing lines & transferUTD35100-300 t/hDiesel, tracked
Crusher discharge stockpilingUTD40S / UTD65200-300 t/hBehind jaw / impact crusher
Screener fraction stackingUTD65 / UTD65S200-500 t/hMultiple units per screener
High-volume quarry stockpilesUTD65S300-500 t/hCummins 93 kW, tracked

Mobile Conveyor FAQ

Answers to the questions plant operators ask before adding a tracked conveyor to their line.

What is a tracked mobile conveyor used for?

It carries crushed or screened material from a crusher, screener or shredder discharge point and stacks it in stockpiles — replacing loader shuttle runs and fixed stackers. It is the finishing piece of a complete mobile processing line.

How much does a UPSEN mobile conveyor cost?

Price depends on model, boom length and belt width. Contact Carlsen Wang (WhatsApp +86 15333827088 or 15333827088@163.com) with your plant throughput and stockpile requirements for a tailored quotation.

What capacity can a UPSEN conveyor handle?

The range covers 100-500 t/h with belt widths from 800 to 1200 mm. The right model depends on what feeds it and the product you stack — send us your plant details and we will match the conveyor to it.

Do the conveyors run on diesel?

Yes — the tracked conveyors are diesel-powered (Cummins engines on the UTD40S, UTD65 and UTD65S), making them fully self-contained on remote sites with no power supply required.

How do I transport a mobile conveyor between sites?

The tracked units weigh from about 5.5 to 8.5 tons and travel on standard flat-rack trailers. On site they reposition under their own tracks using wireless remote control — no crane or foundations needed.

Can I use several conveyors to build a full line?

Yes. Common configurations use one conveyor behind a crusher and additional units behind each screener deck to stack finished fractions separately — one remote-controlled tracked fleet forms the complete material-handling line. Contact us to design the layout.

Related Resources

Why a tracked conveyor?

How self-propelled stackers cut loader cycles, clean-up and site labour versus fixed conveyor lines.

Read the benefits →
Full product catalogue (PDF)

35 pages covering all crushers, shredders, screeners and conveyors with specifications.

Download catalogue →
Plan your stockpile layout

Send your site layout and target stockpile height — we will recommend conveyors and configurations.

Get layout advice →

Get A Quote

Tell us your project · We respond within 24 hours

We respect your privacy. Your information will never be shared.

WhatsApp Get A Quote