How is the shredder output size controlled?

Output size is set by the screen and cutter configuration. Send your required fraction to our engineers and they will specify the right setup and confirm realistic throughput for your material.

Mobile Shredder for C&D Waste, Wood & Concrete Recycling

Q: What materials can UPSEN shredders process?

The UMS / UTS / UFS range processes C&D waste, wood and biomass, scrap metal and end-of-life vehicles, municipal solid waste and tyres.

Q: Can a mobile shredder handle scrap metal and cars?

Yes. The UMS950 is our tracked scrap-car shredder and the UMS750 handles high-volume metal feed. A magnetic separator removes liberated ferrous metal. Heavy structural steel should be pre-cut before feeding.

Q: Shredder or crusher - how do I decide?

For aggregate from hard rock or concrete, choose a crusher. For tough, mixed or metal-bearing waste needing volume reduction before sorting, choose a shredder. Many recycling yards run both in one line.

Q: Diesel or electric drive - which should I choose?

Diesel units are fully self-contained for remote and mobile sites. The UFS750 runs on a 110 kW electric drive - lower running cost and emissions, ideal for indoor and emission-sensitive operations.

Tracked Mobile Shredders for Waste, Scrap Metal & Biomass Recycling

UPSEN (Henan Fangda Industrial) has built tracked mobile crushing, screening and shredding equipment since 2010. The five mobile shredders on this page run from about 15 t/h up to 200 t/h (by material) and use low-speed, high-torque twin-shaft cutting to reduce difficult feed into recyclable fractions: C&D waste, wood and biomass, scrap metal and end-of-life vehicles, municipal solid waste and tyres.

Every unit is self-propelled on tracks, operated by a single wireless remote control, and available with magnetic separation to pull ferrous metal from the output. Choose diesel power (Cummins) for remote sites or the electric-drive UFS750 for indoor and emission-sensitive work. Combined with our crushers, screeners and conveyors, they form complete recycling lines delivered to 80+ countries with CE certification and OEM parts support.

C&D Waste Wood & Biomass Scrap Metal & ELV MSW Tyres

Quick Selection Guide by Throughput

UMS250Self-propelled tracked twin-shaft shredder — C&D 80-130 t/h, wood 15-20 t/h, MSW 15-25 t/h
UTS250Towable trailer version — same twin-shaft shredder and throughput as the UMS250, towed between sites
UMS750High-volume tracked unit — C&D 80-150 t/h, wood 40-60 t/h, scrap metal 15-25 t/h
UMS950Largest tracked shredder — C&D 180-200 t/h, built for scrap cars and metal feed
UFS750Electric-drive unit for indoor / low-emission sites — 20-150 t/h, 110 kW

Tell us your feed material and target output size — we recommend the right machine and screen configuration.

Ask Carlsen on WhatsApp

Shredder (5 Models)

View Details

UMS250

80-130 t/h (C&D) Cummins 154 kW 18 tons

View Details

UMS750

80-150 t/h (C&D) Cummins 264 kW 28 tons

View Details

UMS950

180-200 t/h (C&D) Cummins 410 kW 49 tons

View Details

UFS750

20-150 t/h Electric 110 kW 12 tons

View Details

UTS250

80-130 t/h (C&D) Cummins 154 kW 18 tons

Mobile Shredder vs Mobile Crusher — Which Machine for Your Material

Shredders and crushers are different tools for different feed. Shredding cuts tough, mixed and metal-bearing material; crushing breaks hard rock and concrete into aggregate. UPSEN builds both, so the choice is about your material, not about what we sell.

Mobile Shredders (UMS / UTS / UFS)

Low-speed, high-torque twin-shaft cutting that tears and shears feed rather than impacting it — ideal for material a crusher cannot take.

Best for tough, elastic and mixed feed: wood with nails, C&D rubble, tyres, MSW
The front end of scrap metal and ELV recycling — the UMS950 is our scrap-car shredder
Output size controlled by screen and cutter configuration
Magnetic separation removes ferrous metal from the output stream

Mobile Crushers (UJC / UIC)

Compression (jaw) or high-speed impact breaking of rock and concrete into reusable aggregate fractions.

For natural rock, hard stone and concrete where aggregate product is the goal
Jaw crushers handle rebar-laced demolition concrete; impact crushers produce cubical aggregate
Output is dimensioned by the discharge setting, ready for screening

Compare UPSEN mobile crushers →

A simple decision framework

Metal, tyres, wood or mixed refuse?
You need volume reduction before sorting → shredder.

Hard rock or concrete aggregate?
Natural stone, slabs, rebar concrete → crusher.

Building a full line?
Shred or crush → screen into fractions → convey to stockpile — all UPSEN tracked units.

Indoor or low-emission site?
Choose the electric-drive UFS750 instead of a diesel unit.

Send photos of your feed and your target output to Carlsen on WhatsApp +86 15333827088 — we will match the machine and the screen configuration to the job.

Applications & Machine Matching

Typical feed, the recommended starting model and its rated range. Final selection depends on your material, moisture and the output size you need — our engineers confirm the configuration before you order.

Application / Feed	Recommended Models	Capacity Range	Typical Setup
Wood waste, green waste, biomass	UMS250 / UTS250	15-20 t/h	Same twin-shaft platform (tracked / towable)
C&D debris & bulky refuse	UMS250 / UTS250 / UMS750	80-150 t/h	+ magnetic separator option
MSW & commercial waste	UMS250 / UTS250	15-25 t/h	Volume reduction before sorting
Scrap metal & end-of-life vehicles	UMS750 / UMS950	15-30 t/h	UMS950 = scrap-car shredder
Indoor / emission-sensitive sites	UFS750	20-150 t/h	Electric drive, 110 kW

Mobile Shredder FAQ

Answers to the questions recyclers ask most before buying a tracked mobile shredder.

How much does a UPSEN mobile shredder cost?

Price depends on the model, engine (diesel or electric) and the screen configuration you need. Contact Carlsen Wang (WhatsApp +86 15333827088 or 15333827088@163.com) with your feed material and target output, and we will send a tailored quotation for the right model.

What materials can UPSEN shredders process?

The UMS / UTS / UFS range is built for C&D waste, wood and biomass, scrap metal and end-of-life vehicles, municipal solid waste and tyres. Tell us your feed and we will confirm the correct cutter and screen configuration for it.

Can a mobile shredder handle scrap metal and cars?

Yes — the UMS950 is our tracked scrap-car shredder, and the larger UMS750 handles high-volume metal feed. A magnetic separator removes the liberated ferrous fraction, which is the first step of any metal recycling line. Very heavy structural steel sections should be pre-cut before feeding.

Shredder or crusher — how do I decide?

If your goal is aggregate from hard rock or concrete, choose a crusher. If your feed is tough, mixed or metal-bearing waste that needs volume reduction before sorting, choose a shredder. Many recycling yards run both in one line — see the comparison above and our crusher range.

Diesel or electric drive — which should I choose?

Diesel units (Cummins-powered) are fully self-contained for remote and mobile sites. The UFS750 runs on a 110 kW electric drive — lower running cost and emissions, ideal for indoor, urban or emission-sensitive operations with a power supply on site.

How is the output size controlled?

Output size is set by the screen and cutter configuration of the shredder. Tell us the fraction you need and our engineers will specify the right setup — and confirm the realistic throughput for your material before you order.

Mobile Shredder - Heavy Duty Tracked Shredding Equipment

Tracked Mobile Shredders for Waste, Scrap Metal & Biomass Recycling

Quick Selection Guide by Throughput

Shredder (5 Models)

UMS250

UMS750

UMS950

UFS750

UTS250

Mobile Shredder vs Mobile Crusher — Which Machine for Your Material

Mobile Shredders (UMS / UTS / UFS)

Mobile Crushers (UJC / UIC)

A simple decision framework

Applications & Machine Matching

Mobile Shredder FAQ

Related Resources

Get A Quote