UIC140 on Demolition Rubble — Highway Site in China
Working footage of the UPSEN UIC140 tracked mobile impact crusher on a highway job in China. The camera sits at ground level beside the plant: the excavator feeds, the impactor works, and the discharge belt builds the pile. This page is the dedicated watch page for this video — the full machine specification is on the UIC140 product page.
About this video
A UIC140 working demolition rubble at a highway site in China, filmed under a viaduct pier. The machine is finished in the cream the customer specified; the standard build is UPSEN green.
What the clip shows is the working rhythm rather than a spec sheet. The excavator loads, the impactor pulls the material through, and the discharge belt keeps building the pile. Two operators work on the deck — one at the feeder end, one checking the discharge side — which is how these plants are usually run on a demolition job: the machine is not left unattended while it crushes.
The product on the belt is what buyers ask about. The pile is a graded mix of concrete and brick, with the brick fraction still visible as the red pieces. That is a product which can go back into a sub-base, not waste that has to be hauled away — which on a highway widening contract is usually the whole reason for renting or buying the machine.
Two limits worth stating. The file we hold is 960 × 544 pixels, a copy that has been through a messaging app, so it is softer than a camera original. And no throughput was measured on this job, so the capacity quoted on this page is the catalogue band of 200–350 t/h and nothing more precise.
For buyers comparing options: this machine appears in 1 other working video on this site — see the links below. The full specification table and the configuration differences between builds are on the UIC140 product page.
Send your throughput, feed material, site conditions and destination port through the enquiry form, and we will reply with a configuration and an itemised quotation.
UIC140 key specifications
Where the UIC140 is used
Typical applications
- Quarry production of graded aggregate from limestone and medium-hard rock
- Concrete and asphalt recycling to a screened 0-31.5 mm product
- Highway widening and bridge demolition with on-site rebuilding of rubble
- Contract crushing that moves between pits and job sites
Raw materials handled
- Limestone, dolomite and medium-hard rock up to 800 mm
- Demolition concrete, brick and mixed C&D rubble
- Asphalt (RAP) and milled pavement
- Pre-screened river gravel and quarry run
Where to compare the UIC140
The UIC140 is one of 16 mobile crushers in the UPSEN range. Its nearest neighbours are the UIC80 impactor, the UHC600 hammer crusher and the UJC116 jaw plant; capacity, maximum feed size and total weight are listed side by side.
Common questions about the UIC140
What does video 1 of the UIC140 show?
This clip runs 23 sec. It is working video 1 of 2 published for the UIC140, shot under a highway viaduct in China. The full specification and enquiry form are on the UIC140 product page.
What was the output on this job?
No throughput was measured on this job, so none is quoted. The UIC140 is rated at 200-350 t/h; where a site figure has actually been weighed, it is stated on the page for that video.
Is the machine painted cream as standard?
No. Cream is a customer-specified finish on this unit; the standard build is UPSEN green.
What is the maximum feed size of the UIC140?
800 mm, into a 1390×960 mm feed opening.
How much does a UIC140 weigh?
52,000 kg, with an overall size of 16×3.0×4.0 m on a 500 mm crawler chassis.
More videos of this machine
More mobile crusher working videos
Get a price for the UIC140
Tell us your feed material, required output and site conditions — we will reply with a configuration and quotation. Quotations are FOB Qingdao; EU conformity documentation is confirmed per market.
Email mail@upsen.cn or call / WhatsApp +8615333827088.