UIC140 in Quarry Service — Russian Site Footage
Working footage of the UPSEN UIC140 tracked mobile impact crusher at a quarry in Russia, filmed by Pragma Technology. The clip carries its own on-screen specification for a Cummins-powered build, which is not the configuration we currently quote — the difference is set out in full below. The machine specification on our side is on the UIC140 product page.
About this video
A UIC140 working a quarry in Russia, filmed and edited by Pragma Technology, our partner there. The mark in the top-right corner of every frame is theirs and it is left in place deliberately — it is their footage and we credit it as such.
The clip is worth watching for the working method: excavator loading a large feed, the impactor pulling it through, material travelling up the main belt, and the stockpile building at the discharge end. Screen and return conveyors are visibly part of the plant, which is what lets this machine put out a graded product without a second unit on site.
Filming is drone-and-ground mixed, and there are two low-angle shots of the discharge conveyor at the end of the clip.
The video overlays its own specification. In order as it appears: capacity 150–350 t/h, screen mesh 10/40 mm, maximum feed 800 mm, Cummins 544 hp, working envelope 12.5×7.8×4.1 m, weight 56 t.
That is the unit built for the Russian market. The configuration we currently quote for this model is WEICHAI 400 kW, 52,000 kg, overall size 16×3.0×4.0 m, rated 200–350 t/h, 31.5 mm screen mesh — and that is the table printed on this page and on the product page.
We publish both because the difference is real and buyers deserve to see it rather than discover it in a quotation. Tell us which engine and which duty you need and we will confirm the build in writing.
Send your throughput, feed material, site conditions and destination port through the enquiry form, and we will reply with a configuration and an itemised quotation.
UIC140 key specifications
Where the UIC140 is used
Typical applications
- Quarry production of graded aggregate from limestone and medium-hard rock
- Concrete and asphalt recycling to a screened 0-31.5 mm product
- Highway widening and bridge demolition with on-site rebuilding of rubble
- Contract crushing that moves between pits and job sites
Raw materials handled
- Limestone, dolomite and medium-hard rock up to 800 mm
- Demolition concrete, brick and mixed C&D rubble
- Asphalt (RAP) and milled pavement
- Pre-screened river gravel and quarry run
Where to compare the UIC140
The UIC140 is one of 16 mobile crushers in the UPSEN range. Its nearest neighbours are the UIC80 impactor, the UHC600 hammer crusher and the UJC116 jaw plant; capacity, maximum feed size and total weight are listed side by side.
Common questions about the UIC140
What does video 2 of the UIC140 show?
This clip runs 48 sec. It is working video 2 of 2 published for the UIC140, filmed by Pragma Technology at a quarry in Russia. The full specification and enquiry form are on the UIC140 product page.
Why do the figures on screen differ from the specification table?
Because they describe a different build. The clip shows a Cummins-powered unit of about 56 t with a 12.5×7.8×4.1 m working envelope; the configuration we quote is WEICHAI 400 kW, 52,000 kg and 16×3.0×4.0 m overall, rated 200-350 t/h.
Who filmed this video?
Pragma Technology, our partner in Russia. The watermark in the corner is theirs and is retained deliberately.
What is the maximum feed size of the UIC140?
800 mm, into a 1390×960 mm feed opening.
How much does a UIC140 weigh?
52,000 kg as quoted. The Cummins build in this video is stated on screen at 56 t.
More videos of this machine
More mobile crusher working videos
Get a price for the UIC140
Tell us your feed material, required output and site conditions — we will reply with a configuration and quotation. Quotations are FOB Qingdao; EU conformity documentation is confirmed per market.
Email mail@upsen.cn or call / WhatsApp +8615333827088.