UZS1545 Scalping Construction Waste — Henan Footage
Working footage of the UPSEN UZS1545 tracked mobile screening plant: a 200–400 t/h tracked mobile screening plant on b500x3800mm built for aggregate Topsoil. This page is the dedicated watch page for this video — the full machine specification and enquiry form are on the UZS1545 product page.
About this video
A UZS1545 tracked scalping screener working construction waste in Henan, China. At 28,500 kg it sits in the upper half of the scalper range — the ladder runs down to 4,800 kg on the UYK221 and up to 35,000 kg on the UYK1860 — and the application is the classic one for a machine this size: taking the fines out of demolition rubble before it goes to a crusher.
Measured throughput is 200 m³/h. Rubble scalps well — it is angular, free-flowing and does not mat — so a machine this size reaches high volume on it without difficulty. The limiting factor on a demolition site is usually how fast you can load the hopper, not the deck.
The reason to scalp C&D before crushing is volume. A large share of demolition rubble is already below crusher setting: it will pass through the jaw without being reduced, taking up capacity and wearing plates for nothing. Removing it upstream raises crusher throughput with no change to the crusher, and gives a separate fines product that often has a buyer.
On this machine, expect deck condition to follow moisture. Dry rubble runs all day; rain on a stockpile turns the fines fraction into a paste that blinds the apertures.
For buyers comparing options: this machine appears in 1 other working video on this site — see the links below. The full specification table and EU conformity documentation are on the UZS1545 product page.
Send your throughput, feed material, site conditions and destination port through the enquiry form, and we will reply with a configuration and an itemised quotation.
UZS1545 key specifications
Where the UZS1545 is used
Typical applications
- Scalping sticky, wet or high-fines feed
- Pre-screening before a crusher
- Road base and armour rock grading
- Heavy-duty topsoil and overburden separation
Raw materials handled
- Crushed stone and aggregate
- Sand and gravel
- Topsoil and overburden
- C&D fines and screened rubble
Common questions about the UZS1545
What does video 1 of the UZS1545 show?
This clip runs 33 sec. It is working video 1 of 2 published for the UZS1545, and shows the machine in its working configuration. The full specification and enquiry form are on the UZS1545 product page.
What is the capacity of the UZS1545?
The UZS1545 is rated at 150-400 t/h. Achieved output depends on the feed material, its moisture content and how the machine is set up.
How much does a UZS1545 weigh?
The UZS1545 has an operating weight of 28,500 kg.
What materials can the UZS1545 handle?
The UZS1545 is used with crushed stone and aggregate; sand and gravel; topsoil and overburden; c&D fines and screened rubble. See the UZS1545 product page for the full specification.
More videos of this machine
More mobile screener working videos
Get a price for the UZS1545
Tell us your feed material, required output and site conditions — we will reply with a configuration and quotation. The UZS1545 is available for sale worldwide, and EU conformity documentation is supplied with every unit.
Email mail@upsen.cn or call / WhatsApp +8615333827088.