UYK1545 Tracked Scalping Screener 95-190 m³/h

Q: What is the capacity of the UYK1545?

Rated capacity is 95-190 m³/h. Actual output depends on the material, the feed size and the discharge setting.

Q: How big and how heavy is the UYK1545?

31,000 kg, transport size 15.6×3.1×3.4 m. It can be moved on a standard low-bed trailer without dismantling.

Q: Does the UYK1545 come with EU conformity documentation, and how is it delivered?

Yes -UPSEN machines are supplied with EU conformity documentation and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.

Q: What are the payment, lead time and warranty terms?

Payment is 30% T/T deposit with the balance paid before shipment; an irrevocable L/C at sight is also accepted. Quotations are FOB Qingdao and valid for 30 days. Lead time is 15 days for standard models and 30 days for customised configurations, counted from receipt of deposit. The complete machine carries a 12-month warranty from commissioning, and wear parts such as jaw plates carry 6 months with a typical service life of 800-1,200 hours depending on the feed material. Full terms are on our trade terms and service.

Q: Is the UYK1545 named in the EU conformity documents?

Yes. The UYK1545 is named in the ECM Mark certificate 0P250820.HFIQW55, the ICR Polska Verification of Conformity ICR Polska/VC/H211205, the ICR Polska noise verification ICR/VC/UA260915 and the EN ISO 3744:2010 noise test report LTR20260909001. You can download the original documents from our certifications and compliance page.

Q: Do you send an engineer for installation and operator training?

Yes. On-site installation, commissioning and operator training are available. Travel and accommodation are charged at cost and there is no separate service fee. Tell us the site location and we will estimate the number of days.

Product Description

The UYK1545 is a track-mounted vibrating screening plant that sizes crushed stone, sand and gravel into clean, saleable fractions on site.

Multi-deck screening (3 decks) delivers up to 95-190 m³/h of throughput, powered by a Cummins 74 kW / 100 HP diesel engine.

Screening directly behind a crusher closes the production loop - oversize returns to the crusher and finished fractions stockpile without loader shuttling. Remote-controlled operation, tracked mobility and a 12-month warranty are standard on every UPSEN machine, with EU conformity documentation and OEM spare parts support for customers in 80+ countries.

2-3 deck configurations for multiple fractions in one pass
Interchangeable screen media for custom cut points
Oversize chute supports closed-circuit crushing
Works standalone or behind any crusher or shredder

UYK1545 tracked mobile scalping screener side view

Key Specifications

Capacity

95-190 m³/h

Engine

Cummins 74 kW / 100 HP

Total Weight

31,000 kg

Working Size

15.6×15.7×4.5 m

Feed Bin4300×2200 mm (sieve bar, hydraulic lifting)(169.3×86.6 in)

Feed ConveyorB1050×6500 mm(B41.3×255.9 in)

Products Conveyor (1 pc)B1000×6500 mm (stacking 3100 mm)(B39.4×255.9 in)

Products Conveyors (3 pcs)B650×6000 mm (stacking 4600 mm)(B25.6×236.2 in)

Track TypeB500×3800 mm(B19.7×149.6 in)

Vibrating Screen3YK1545

Screen Size1500×4500 mm(59.1×177.2 in)

Screen Layers3

Mesh Size5/10/30 mm(0.2/0.4/1.2 in)

Transport Size (LxWxH)15.6×3.1×3.4 m

Detail Images

UYK1545 at a glance

The UPSEN UYK1545 is a mobile aggregate screener built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is 95-190 m³/h, fed from a 4300×2200 mm feed bin.

The unit travels as one load on a low-bed trailer -15.6×3.1×3.4 m and 31,000 kg -and is driven by Cummins 74 kW / 100 HP, so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.

When specifying a mobile aggregate screener, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.

Typical applications

Grading sand, gravel and crushed stone
Producing 2- sized products in one pass
Recycling C&D into reusable aggregate
Quarry secondary screening behind a crusher

Raw materials handled

Crushed stone and aggregate
Sand and gravel
Topsoil and overburden
C&D fines and screened rubble

How the UYK1545 compares

Model	Capacity	Max. feed size	Total weight
UYK1545 (this model)	95-190 m³/h	—	31,000 kg
UYK-F1550	125 m³/h	—	25,000 kg
UYK1235	20-60 m³/h	< 150 mm	11,000 kg
UYK1860	190-250 m³/h	—	35,000 kg

Duty, capacity and material fit for every model are compared side by side in the 10-model screener capacity and material matrix.

Recommended line-up for the UYK1545

Based on rated capacity, the following UPSEN units are usually specified together with the UYK1545:

UJC116 -tracked mobile jaw crusher · 160-500 t/h
UTD40S -tracked mobile stacker conveyor · 150-300 t/h

Frequently asked questions

What is the capacity of the UYK1545?

Rated capacity is 95-190 m³/h. Actual output depends on the material, the feed size and the discharge setting.

How big and how heavy is the UYK1545?

31,000 kg, transport size 15.6×3.1×3.4 m. It can be moved on a standard low-bed trailer without dismantling.

What drives the machine?

Cummins 74 kW / 100 HP.

Does the UYK1545 come with EU conformity documentation, and how is it delivered?

Yes -UPSEN machines are supplied with EU conformity documentation and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.

What are the payment, lead time and warranty terms?

Payment is 30% T/T deposit with the balance paid before shipment; an irrevocable L/C at sight is also accepted. Quotations are FOB Qingdao and valid for 30 days. Lead time is 15 days for standard models and 30 days for customised configurations, counted from receipt of deposit. The complete machine carries a 12-month warranty from commissioning, and wear parts such as jaw plates carry 6 months with a typical service life of 800-1,200 hours depending on the feed material. Full terms are on our trade terms and service.

Is the UYK1545 named in the EU conformity documents?

Yes. The UYK1545 is named in the ECM Mark certificate 0P250820.HFIQW55, the ICR Polska Verification of Conformity ICR Polska/VC/H211205, the ICR Polska noise verification ICR/VC/UA260915 and the EN ISO 3744:2010 noise test report LTR20260909001. You can download the original documents from our certifications and compliance page.

Do you send an engineer for installation and operator training?

Yes. On-site installation, commissioning and operator training are available. Travel and accommodation are charged at cost and there is no separate service fee. Tell us the site location and we will estimate the number of days.