Ordering a mobile crushing plant is not a catalogue purchase. Below is exactly how we quote, how we build, how the machine ships and what we support afterwards — in writing, before you commit to anything. If any point needs to be different for your project, say so and we will put the alternative in the quotation.
| Item | Standard term |
|---|---|
| Minimum order quantity | One unit (1 set). We build to order, not from stock, so a single machine is a normal order for us. |
| Payment terms | 30% T/T deposit, balance paid before shipment. Irrevocable L/C at sight is also accepted. |
| Quotation | Quotations are FOB Qingdao and valid for 30 days. CIF and other Incoterms can be quoted if you give us the destination port. |
| Lead time | 15 days for standard models, 30 days for customised configurations, counted from receipt of deposit. |
| Machine warranty | 12 months from commissioning, covering the complete machine. |
| Wear parts | Wear parts such as jaw plates carry a 6-month warranty. Typical service life is 800–1,200 hours depending on the feed material and the settings used. |
| Installation & training | On-site installation, commissioning and operator training are available. Travel and accommodation are charged at cost; there is no separate service fee. |
| Certification | ISO 9001:2015 quality management system; EU conformity documentation verified by three independent bodies; signed EU Declaration of Conformity for Directive 2000/14/EC; EN ISO 3744 noise test with LWA 91 dB(A). See the certificates and download the PDFs → |
Terms shown are our standard terms. Where a project needs something different, the signed quotation and contract take precedence over this page.
Loading is decided machine by machine, because transport cost is usually the second-largest line on the invoice after the machine itself.
The UJC704 fits two units in one container, so you pay for one ocean freight slot instead of two. Ask us for the loading plan for the model you are buying.
The UJC106 is shipped by bulk vessel rather than containerised. We prepare the machine for deck or hold stowage and supply the securing scheme.
Commercial invoice, packing list, bill of lading, certificate of origin, Declaration of Conformity, machine identification and marking information, and the engine certificate for the engine actually installed. Tell us the destination and we will confirm the list in writing.
A construction and demolition waste recycler in Russia operates a UPSEN UMS750 mobile shredder at a working rate of 150 tonnes per hour, processing mixed C&D material into a reusable output stream. The machine was supplied with on-site installation and commissioning support.
Reference available on request during the quotation stage.
30% T/T deposit with the order, and the balance paid before shipment. We also accept an irrevocable L/C at sight. Payment details are stated on the proforma invoice.
One unit. Every machine is built to order, so we do not require a minimum batch.
15 days for standard models and 30 days for customised configurations, counted from the day we receive the deposit. If your project has a fixed shipping window, tell us the date and we will confirm whether it is achievable before you pay.
Our quotations are FOB Qingdao and valid for 30 days. If you give us the destination port we can also quote CIF or another Incoterm so you can compare the landed cost.
The complete machine is covered for 12 months from commissioning. Wear parts such as jaw plates carry a 6-month warranty; their normal working life is around 800 to 1,200 hours depending on the material you feed and the settings you run.
Yes. On-site installation, commissioning and operator training are available. We charge travel and accommodation at cost only — there is no separate service fee. Tell us the site location and we will estimate the number of days.
It depends on the model. Two UJC704 units fit in one container. The UJC106 is too large for containerised shipment and goes by bulk vessel. Ask us for the loading plan for your model before you book freight.
We can arrange a video call walk-around of the machine during assembly, and where a reference site is accessible we will try to arrange contact with the operator. Ask during the quotation stage and we will tell you what is possible for the model you are considering.
Send the model, the material you will process and the destination port. You will get a quotation with the delivery time and the shipping plan.
Quality & compliance: ISO 9001:2015 quality management · EU conformity documentation verified by three independent bodies · EN ISO 3744:2010 noise tested, LWA 91 dB(A)