Working footage of the UPSEN UMS750 heavy duty tracked mobile shredder: a 28,000 kg tracked shredder with a 5100×2300 mm feed inlet, rated 40-60 t/h in wood waste and 80-150 t/h in C&D debris. This page is the dedicated watch page for this video — the full machine specification and enquiry form are on the UMS750 product page.
About this video
Customer site footage from Australia, 2025: a UMS750 tracked shredder working wooden pallets and plywood. The feed is lifted in by machine grab straight from the stockpiled heap rather than tipped in loose, and the clip follows one grab from the hopper, into the cutter box and out to the stockpile at the discharge end.
Output on this job is 40 t/h, which is the floor of the 40-60 t/h wood-waste rating. Pallets and plywood are bulky and void-rich — a large part of the volume is air, and the material compresses under the discs before it cuts — so wood lands a long way below the 80-150 t/h C&D figure on the same machine. Sizing a wood job from the C&D number is the most common mistake we see at quotation stage.
The feed inlet is 5100×2300 mm and lifts hydraulically; the hopper holds 7 m³, the knife discs are 730 mm on a 2000 mm spindle turning at 0-42 r/min, with 240,000 N/M of reducer torque behind them. On pallets that inlet width is what keeps the machine fed: a full grab goes in without being broken down first, and that is where the tonnage comes from.
Pallets arrive with nails and staples in them. A B800×2200 iron remover is an option on this model and worth specifying if the shredded wood is going on to a boiler or a board plant rather than to landfill cover.
This is 1 of 6 working videos published for the UMS750 — the household-waste clip from a different Australian site, and four factory and multi-material tests, are linked below. The full specification table and EU conformity documentation are on the UMS750 product page.
Send your throughput, feed material, site conditions and destination port through the enquiry form, and we will reply with a configuration and an itemised quotation.
UMS750 key specifications
Where the UMS750 is used
Typical applications
- Construction and demolition waste (C&D)
- Municipal solid waste and bulky waste
- Wood waste, pallets and green waste
- Scrap metal and light steel
Raw materials handled
- C&D waste and mixed demolition debris
- Wood, pallets and biomass
- MSW (municipal solid waste)
- Scrap metal and end-of-life vehicles
Where to compare the UMS750
The UMS750 is one of 5 mobile shredders in the UPSEN range, 15 to 200 t/h. Output by material - C&D debris, wood, MSW and scrap metal - is listed for every model.
Common questions about the UMS750
What does this video show?
It runs 37 sec and shows a UMS750 shredding wooden pallets and plywood at a site in Australia in 2025, at 40 t/h — the floor of the model’s 40-60 t/h wood-waste rating. The full specification and enquiry form are on the UMS750 product page.
How much does a UMS750 weigh?
The UMS750 has an operating weight of 28,000 kg.
What materials can the UMS750 handle?
The UMS750 is used with c&D waste and mixed demolition debris; wood, pallets and biomass; mSW (municipal solid waste); scrap metal and end-of-life vehicles. See the UMS750 product page for the full specification.
Does the UMS750 come with EU conformity documentation?
The UMS750 is supplied with EU conformity documentation; the delivery route is confirmed with your order.
More videos of this machine
UMS750 With a Grate Fitted — Wood Down to Under 50 mm
1 min 19 sec · working video of the same machine
UMS750 on Household Waste — Australian Customer Site
31 sec · working video of the same machine
UMS750 Multi-Material Test — 15 to 150 t/h
3 min 52 sec · working video of the same machine
UMS750 Second Multi-Material Test — 20 to 150 t/h
41 sec · working video of the same machine
UMS750 — Torque, Cutter and Capacity Explained
3 min 49 sec · working video of the same machine
More mobile shredder working videos
Get a price for the UMS750
Tell us your feed material, required output and site conditions — we will reply with a configuration and quotation. The UMS750 is available for sale worldwide, and EU conformity documentation is supplied with every unit.
Email mail@upsen.cn or call / WhatsApp +8615333827088.