Working footage of the UPSEN UTC604 portable trailer jaw crusher: a trailer-mounted jaw crusher rated 15-30 t/h, built for contract crushing where a tracked plant would never be mobilised. This page is the dedicated watch page for this video — the full machine specification and enquiry form are on the UTC604 product page.
About this video
A UTC604 portable trailer jaw crusher working on a demolition site in Spain in 2026. The feed is demolition concrete — precast wall panels and structural elements, with reinforcement still in it — lifted in by excavator and dropped into the 1650×1300 mm hopper. Crushed product is stockpiled by the B500×2500 mm discharge conveyor at the front of the chassis.
Measured throughput ran 20-30 t/h across the job, which puts it in the upper half of the model’s 15-30 t/h rating. Demolition concrete is the densest feed this machine sees, so 20-30 t/h with reinforcement still in the mix is a planning figure rather than a best case.
This unit left the factory in the customer’s paint colour — cream, with the model designation on the side panel — instead of the standard green shown in the catalogue photographs. Everything under the paint is standard: JC604 jaw, 650×350 mm feed opening, 15-100 mm discharge range, R850/200 tyres on a twin axle, 3,350 kg all-up.
The 650×350 mm feed opening and the 300 mm maximum feed size are the practical limits on this job. Precast panels arrive far larger than either, so they have to be broken down before feeding, and that step is what decides whether the machine runs continuously or in stops. Buyers who plan the breaking step into the cycle get the tonnage above; buyers who do not spend the day clearing the chamber.
This is 1 of 2 working videos published for the UTC604 — the Shandong construction-waste clip is linked below. The full specification table and EU conformity documentation are on the UTC604 product page.
Send your throughput, feed material, site conditions and destination port through the enquiry form, and we will reply with a configuration and an itemised quotation.
UTC604 key specifications
Where the UTC604 is used
Typical applications
- Small to mid-size contract crushing
- Remote sites reached on public roads
- Concrete, brick and asphalt recycling
- Start-up operations with limited capital budget
Raw materials handled
- Granite, basalt and river stone
- Reinforced concrete with rebar
- Demolition rubble and C&D debris
- Quarry-run rock and ballast
Where to compare the UTC604
The UTC604 is one of 12 mobile jaw crushers in the UPSEN range, 6 to 500 t/h, with maximum feed openings from 180x300 mm up to 650 mm. Capacity, maximum feed size and total weight are listed side by side.
Common questions about the UTC604
What does this video show?
It runs 34 sec and shows a UTC604 crushing demolition concrete on a site in Spain in 2026, at a measured 20-30 t/h — the upper half of the model’s 15-30 t/h rating. The full specification and enquiry form are on the UTC604 product page.
What materials can the UTC604 handle?
The UTC604 is used with granite, basalt and river stone; reinforced concrete with rebar; demolition rubble and C&D debris; quarry-run rock and ballast. See the UTC604 product page for the full specification.
Does the UTC604 come with EU conformity documentation?
The UTC604 is supplied with EU conformity documentation; the delivery route is confirmed with your order.
More videos of this machine
More mobile crusher working videos
Get a price for the UTC604
Tell us your feed material, required output and site conditions — we will reply with a configuration and quotation. The UTC604 is available for sale worldwide, and EU conformity documentation is supplied with every unit.
Email mail@upsen.cn or call / WhatsApp +8615333827088.