UTC604 Trailer-Mounted Jaw Crusher 15-50 t/h

Product Description

The UTC604 is a portable trailer-mounted jaw crusher for contractors who move between sites - tow it behind a truck and start crushing within minutes of arrival.

Rated capacity reaches 15-50 t/h, driven by a YANMAR 28 kW (Euro 5 / Tier 4) diesel engine. Up to 650×350 mm of feed such as reinforced concrete, brick, asphalt and river stone is reduced to reusable aggregate.

Trailer crushers keep capital cost and site setup time low, which makes them a natural fit for rental fleets and municipal recycling yards. Remote-controlled operation, tracked mobility and a 12-month warranty are standard on every UPSEN machine, with EU conformity documentation and OEM spare parts support for customers in 80+ countries.

Towable behind a standard truck
Compact transport envelope and low operating weight
Same jaw-crushing action as larger tracked models
Fast setup - crushing within minutes of arrival

UTC604 portable trailer jaw crusher side view

Key Specifications

Capacity

15-50 t/h

Engine

YANMAR 28 kW (Euro 5 / Tier 4)

Max. Feeding Size

280×520 mm(11×20.5 in)

Total Weight

3,350 kg

Working Size

5600×1550×2100 mm(220.5×61×82.7 in)

Feed Port Size

650×350 mm(25.6×13.8 in)

Feed Hopper1650×1300 mm(65×51.2 in)

Jaw Crusher ModelJC406

Jaw PlateZgMn 13Cr2

Discharge Range15-100 mm(0.6-3.9 in)

Driving ModeEngine direct drive

Discharge ConveyorB500×2500 mm (stacking 1300 mm, hydraulic motor)(B19.7×98.4 in)

Tyre TypeTruck tire R850/200

Transport Size (LxWxH)3800×1550×2650 mm(149.6×61×104.3 in)

TypeTrailer / Mobile Jaw Crusher

Detail Images

UTC604 at a glance

The UPSEN UTC604 is a trailer-mounted jaw crusher built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is 15-50 t/h, fed from a 1650×1300 mm hopper and taking material up to 280×520 mm at the inlet.

The unit travels as one load on a low-bed trailer — 3800×1550×2650 mm transport, 3,350 kg — and is driven by YANMAR 28 kW (Euro 5 / Tier 4), so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.

When specifying a trailer-mounted jaw crusher, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.

Typical applications

Small to mid-size contract crushing
Remote sites reached on public roads
Concrete, brick and asphalt recycling
Start-up operations with limited capital budget

Raw materials handled

Granite, basalt and river stone
Reinforced concrete with rebar
Demolition rubble and C&D debris
Quarry-run rock and ballast

How the UTC604 compares

Model	Capacity	Max. feed size	Total weight
UTC604 (this model)	15-50 t/h	280×520 mm	3,350 kg
UTC503	10-30 t/h	250 mm	4,500 kg
UHC600	15-40 t/h	250 mm	4,800 kg
UIC80	30-150 t/h	500 mm	24,000 kg

Recommended line-up for the UTC604

Based on rated capacity, the following UPSEN units are usually specified together with the UTC604:

UYK221 — mobile scalping screener · 20-30 m³/h
UTD35 — tracked mobile stacker conveyor · 30-100 t/h

Frequently asked questions

What is the capacity of the UTC604?

Rated capacity is 15-50 t/h. Actual output depends on the material, the feed size and the discharge setting.

What is the maximum feed size?

The UTC604 accepts material up to 280×520 mm.

How big and how heavy is the UTC604?

3,350 kg, transport size 3800×1550×2650 mm. It can be moved on a standard low-bed trailer without dismantling.

What drives the machine?

YANMAR 28 kW (Euro 5 / Tier 4).

Does the UTC604 come with EU conformity documentation, and how is it delivered?

Yes — UPSEN machines are supplied with EU conformity documentation and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.

What are the payment, lead time and warranty terms?

Payment is 30% T/T deposit with the balance paid before shipment; an irrevocable L/C at sight is also accepted. Quotations are FOB Qingdao and valid for 30 days. Lead time is 15 days for standard models and 30 days for customised configurations, counted from receipt of deposit. The complete machine carries a 12-month warranty from commissioning, and wear parts such as jaw plates carry 6 months with a typical service life of 800-1,200 hours depending on the feed material. Full terms are on our trade terms and service.

Is the UTC604 named in the EU conformity documents?

Yes. The UTC604 is named in the ECM Mark certificate 0P250820.HFIQW55 and the ICR Polska noise verification ICR/VC/UA260915. You can download the original documents from our certifications and compliance page.

Do you send an engineer for installation and operator training?

Yes. On-site installation, commissioning and operator training are available. Travel and accommodation are charged at cost and there is no separate service fee. Tell us the site location and we will estimate the number of days.