UTC604 Crushing Construction Waste — Shandong Site Footage

Working footage of the UPSEN UTC604 portable trailer stone crusher: a portable trailer stone crusher built for sale — working video. This page is the dedicated watch page for this video — the full machine specification and enquiry form are on the UTC604 product page.

Machine
UTC604 Portable Trailer Stone Crusher
Video length
1 min 42 sec
Published
22 September 2026
Video file
0023f6d023361f9990f151bcc9d10da3.mp4

About this video

A UTC604 portable trailer jaw crusher working construction waste on a site in Shandong, China. The feed is demolition and refurbishment rubble: concrete fragments, brick, mortar and tile, with the reinforcement cut out before feeding.

Measured throughput is 25 t/h, mid-band against the 15-30 t/h rating. That position is what mixed rubble normally gives on a jaw of this size — the machine is not limited by power, it is limited by how much of the feed is already fine enough to pass and by how often a lump has to be re-broken.

The 650×350 mm feed opening is the practical constraint on this job. Rubble arriving from a strip-out contains slabs and kerb sections that will not enter, so there is normally a breaking step before the crusher — a breaker on the excavator, or a larger piece left out of the feed. Sites that plan for that step get a steady 25 t/h; sites that do not spend the day clearing the chamber.

At 3,350 kg it tows behind a light vehicle, which is the whole point of the model: a crusher that goes to small jobs where a tracked plant would never be mobilised.

This is the only working video published for the UTC604 so far. The full specification table and EU conformity documentation are on the UTC604 product page.

Prices are quoted per project rather than published as a fixed figure, because the final price varies significantly with the diesel engine specified (brand, power rating and emission standard), the machine configuration (chassis, screening decks, conveyors, CE or EPA compliance), the drive mode (tracked or wheeled, and how the crusher itself is driven), and exchange-rate movement at the time of order.

Send your throughput, feed material, site conditions and destination port through the enquiry form, and we will reply with a configuration and an itemised quotation.

Where the UTC604 is used

Typical applications

  • Small to mid-size contract crushing
  • Remote sites reached on public roads
  • Concrete, brick and asphalt recycling
  • Start-up operations with limited capital budget

Raw materials handled

  • Granite, basalt and river stone
  • Reinforced concrete with rebar
  • Demolition rubble and C&D debris
  • Quarry-run rock and ballast

Common questions about the UTC604

What does video 1 of the UTC604 show?

This clip runs 1 min 42 sec. It is working video 1 of 1 published for the UTC604, and shows the machine in its working configuration. The full specification and enquiry form are on the UTC604 product page.

What materials can the UTC604 handle?

The UTC604 is used with granite, basalt and river stone; reinforced concrete with rebar; demolition rubble and C&D debris; quarry-run rock and ballast. See the UTC604 product page for the full specification.

Does the UTC604 come with EU conformity documentation?

The UTC604 is supplied with EU conformity documentation; the delivery route is confirmed with your order.

More mobile crusher working videos

Get a price for the UTC604

Tell us your feed material, required output and site conditions — we will reply with a configuration and quotation. The UTC604 is available for sale worldwide, and EU conformity documentation is supplied with every unit.

Email mail@upsen.cn  or call / WhatsApp +8615333827088.