Full UPSEN product catalogue -35 pages, all models & specsDownload Catalogue (PDF)
Home / Products / Model

UFS250 80-130 t/h Trailer-Mounted Mobile Shredder for C&D Waste, Hook-Lift Transportable

Product Description

The UFS250 is a frame-mounted mobile shredder built as a trailer. Twin low-speed shafts cut bulky, tough and reinforced waste down to 150 mm or less, and the unit is rated 80-130 t/h on construction and demolition waste at an operating weight of 19,500 kg.

Material drops into a 4,500 × 2,200 mm inlet onto a 680 mm knife disc cut in HARDOX 500 (NM500), on a 1,550 mm spindle turned at 0-50 r/min through a 160,000 N·m reducer. A Linde pump and motor with a SUN valve block work from a 400 L tank. The shredding drive is 160 kW and the on-board diesel genset is rated 242 kW, so the machine runs without a site power supply.

Because it sits on its own wheeled chassis with a tow frame, the UFS250 moves between yards without a low-bed trailer, and the same chassis can be carried as one unit by a hook-lift roll-off truck. A B650 × 1200 belt-type iron remover sits over the discharge, and a simple screening machine — 30 mm openings on an 800 × 1,200 mm deck — is supplied with the set.

UFS250 trailer-mounted mobile shredder, front three-quarter view

Key Specifications

Capacity
80-130 t/h (C&D)
Engine
Diesel genset 242 kW · 160 kW shredding drive
Max. Feeding Size
300×2800 mm
Total Weight
19,500 kg
Working Size
9600×2200×3750 mm
ModelU-FS250
TypeTrailer-Mounted / Hook-Lift Frame Shredder
Feed Inlet4500×2200 mm
Knife Disc DiameterØ680 mm
Spindle Length1550 mm
Discharge Particle Size≤150 mm
Knife Disc MaterialHARDOX 500 (NM500)
Spindle Speed0-50 r/min
Reducer Torque160,000 N·m
Hydraulic SystemLinde pump / Linde motor · SUN valve · oil tank 400 L
Main ConveyorB800×8500 mm (stacking height 2800 mm)
Iron RemoverB650×1200 (belt type)
Included EquipmentSimple screening machine · 30 mm openings · 800×1200 mm deck · 1 unit
Transport Size (LxWxH)7100×2200×2600 mm
Working Size (LxWxH)9600×2200×3750 mm

Product Videos

Detail Images

Interested in This Machine?

Contact us for a detailed quotation and specifications sheet.

Send Inquiry

Get A Quote

Tell us your project · We respond within 24 hours

We respect your privacy. Your information will never be shared.

UFS250 at a glance

The UPSEN UFS250 is a trailer-mounted mobile shredder built for yards that have to move the machine, not the material. Twin low-speed shafts take construction and demolition waste at a rated 80-130 t/h and reduce it to 150 mm or less, discharging onto an 800 mm belt 8,500 mm long that stacks at 2,800 mm.

Feed drops into a 4,500 × 2,200 mm inlet onto a 680 mm knife disc cut in HARDOX 500 (NM500), carried on a 1,550 mm spindle and turned at 0-50 r/min through a 160,000 N·m reducer. The shredding drive is 160 kW, powered by an on-board diesel genset rated 242 kW, so the machine works without a site power supply. Linde pump and motor with a SUN valve block draw from a 400 L tank, and a B650 × 1200 belt-type iron remover sits over the discharge head.

The chassis is the difference from a tracked shredder. At 19,500 kg folded to 7,100 × 2,200 × 2,600 mm, the UFS250 travels on its own wheels behind a tractor unit and does not need a low-bed trailer; the same chassis can also be carried as one unit by a hook-lift roll-off truck, so a single truck can drop it at one yard in the morning and collect it from another in the afternoon. A simple screening machine with 30 mm openings on an 800 × 1,200 mm deck is supplied with the set.

When specifying a trailer shredder, check three things against the job: the inlet against the bulkiest item you actually feed, the discharge conveyor against the stacker or screen that clears the output, and the towing or hook-lift vehicle against the 19,500 kg transport weight. An oversized chamber runs below capacity, and an undersized one bridges and stalls the shafts.

Capacity by material

MaterialRated capacity
Construction waste80-130 t/h
Reinforced concrete70-100 t/h
Reinforced concrete, under 16 mm4 pcs/min
Concrete sleepers15-20 t/h
Wood waste15-18 t/h
Root15-25 t/h

Capacity figures are indicative and depend on the material, its moisture content and the knife configuration; they are not a guaranteed output for a given job.

Typical applications

Raw materials handled

Transport, footprint and what is in the set

ItemUFS250
Transport size, discharge conveyor folded7,100 × 2,200 × 2,600 mm
Working size, belt in operating position9,600 × 2,200 × 3,750 mm
Operating weight19,500 kg
ChassisWheeled frame, towed — no low-bed trailer needed
Supplied with the setSimple screening machine, 30 mm openings, 800 × 1,200 mm deck, 1 unit

Full range by waste material: compare the mobile shredder range → · how twin-shaft cutting works →

Recommended line-up for the UFS250

Based on rated capacity, the following UPSEN units are usually specified with a trailer-mounted UFS250:

Frequently asked questions

What is the capacity of the UFS250?

Rated capacity is 80-130 t/h on construction and demolition waste. On reinforced concrete it is 70-100 t/h, on concrete sleepers 15-20 t/h, on wood waste 15-18 t/h and on root stock 15-25 t/h. Output depends on the material, its moisture and the knife configuration.

What is the maximum feed size?

The feed inlet is 4500×2200 mm and the maximum feed size is 300×2800 mm. Material is cut on a 680 mm knife disc mounted on a 1550 mm spindle.

What is the discharge size and how is the product cleared?

Discharge particle size is up to 150 mm. Product leaves on an 800 mm belt conveyor, 8500 mm long, stacking at 2800 mm, with a B650×1200 belt-type iron remover over the head.

How heavy is the UFS250 and how does it travel?

Operating weight is 19,500 kg. Folded for transport the unit measures 7100×2200×2600 mm, so it is towed on its own wheeled chassis without a low-bed trailer, and the same chassis can be carried as one unit by a hook-lift roll-off truck.

What drives the machine?

The shredding drive is 160 kW. An on-board diesel genset rated 242 kW supplies the power, so no site electricity is needed. Hydraulics are Linde pump and Linde motor with a SUN valve block working from a 400 L tank.

What is included with the UFS250?

One U-FS250 frame mobile shredder plus a simple screening machine with 30 mm openings on an 800×1200 mm screen deck, supplied as one set.

What are the delivery and warranty terms?

The main unit carries a 12-month warranty, with quick-wear parts excluded. Current delivery, payment and shipping terms are set out on our trade terms and service page, and are confirmed in the written quotation for your configuration.

Which certification documents come with the machine?

UPSEN supplies the CE-ECM type approval No. 0P250820.HFIQW55 issued under 2006/42/EC, 2014/35/EU and 2014/30/EU, valid to 19 Aug 2030, the ISO 9001:2015 certificate CMIC 78826Q00559R001, and the EU trade mark registration EUIPO No. 018478522.

Related mobile shredders

UFS750 tracked mobile shredderUFS75080-150 t/h (C&D, asphalt), trackedUMS250 tracked mobile shredderUMS25080-130 t/h (C&D), Cummins 154 kWUMS750 tracked mobile shredderUMS750High-volume tracked unit

Quality & compliance: ISO 9001:2015 quality management · EU conformity documentation verified by three independent bodies · EN ISO 3744:2010 noise tested, LWA 91 dB(A)

Certificates & declarationsTrade terms & service

WhatsApp Call Quote