UTS250 Tracked Mobile Shredder 15-130 t/h (C&D)

Product Description

The UTS250 is a tracked mobile shredder that uses low-speed, high-torque twin-shaft cutting to reduce bulky, tough and metal-bearing waste into recyclable fractions.

It processes C&D waste, wood and biomass, municipal solid waste and, depending on model, scrap metal and end-of-life vehicles - rated up to 15-130 t/h (C&D). A Cummins 250 kW diesel generator set engine provides the drive power. Operating weight is about 19,000 kg.

Output size is set by the screen configuration, and an optional over-belt magnet recovers ferrous metal from the output - the first step of any metal recycling line. Remote-controlled operation, tracked mobility and a 12-month warranty are standard on every UPSEN machine, with EU conformity documentation and OEM spare parts support for customers in 80+ countries.

Twin-shaft cutting handles wood, tyres, MSW, C&D and scrap metal
Optional over-belt magnet recovers ferrous metal
Screen configuration controls final output size
Electric-drive option available for indoor sites

UTS250 tracked mobile shredder side view

Key Specifications

Engine

Cummins 250 kW diesel generator set

Max. Feeding Size

300×2800 mm(11.8×110.2 in)

Total Weight

19,000 kg

Working Size

11.5×2.4×3.5 m

Feed Port Size

1200×1500 mm(47.2×59.1 in)

Cutter MaterialNM 500

Hopper Size1500×2800 mm(59.1×110.2 in)

Shaft Diameter680 mm(26.8 in)

Shaft Length1550 mm(61 in)

Rotating Speed0-45 r/min

Gear Reducer Torque160,000 N/M

Hydraulic SystemClosed circuit (Linde)

Main ConveyorB800×9000 mm (stacking height 3000 mm)(B31.5×354.3 in)

Iron SeparatorB650×2000

Tyre TypeCar tire x 4

Capacity (C&D Debris)15-130 t/h (C&D)

Transport Size (LxWxH)13×2.4×3.2 m

TypeTire-Type Mobile Shredder

Detail Images

UTS250 at a glance

The UPSEN UTS250 is a tracked mobile shredder built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is 15-130 t/h (C&D), fed from a 1500×2800 mm hopper and taking material up to 1200×1500 mm at the inlet.

The unit travels as one load on a low-bed trailer -13×2.4×3.2 m transport and 19,000 kg -and is driven by Cummins 250 kW diesel generator set, so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.

When specifying a tracked mobile shredder, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.

Typical applications

Construction and demolition waste (C&D)
Municipal solid waste and bulky waste
Wood waste, pallets and green waste
Scrap metal and light steel

Raw materials handled

C&D waste and mixed demolition debris
Wood, pallets and biomass
MSW (municipal solid waste)
Scrap metal and end-of-life vehicles

How the UTS250 compares

Model	Capacity	Max. feed size	Total weight
UTS250 (this model)	15-130 t/h (C&D)	1200×1500 mm	19,000 kg
UFS750	80-150 t/h	4200×2300 mm	24,000 kg
UMS250	80-130 t/h (C&D)	1200×1500 mm	18,000 kg
UMS750	80-150 t/h (C&D)	5100×2300 mm	28,000 kg

Recommended line-up for the UTS250

Based on rated capacity, the following UPSEN units are usually specified together with the UTS250:

UYK221 -mobile scalping screener · 20-30 m³/h
UTD35 -tracked mobile stacker conveyor · 30-100 t/h

Frequently asked questions

What is the capacity of the UTS250?

Rated capacity is - Actual output depends on the material, the feed size and the discharge setting.

What is the maximum feed size?

The UTS250 accepts material up to 1200×1500 mm.

How big and how heavy is the UTS250?

19,000 kg, transport size 13×2.4×3.2 m. It can be moved on a standard low-bed trailer without dismantling.

What drives the machine?

Cummins 250 kW diesel generator set.

Does the UTS250 come with EU conformity documentation, and how is it delivered?

Yes -UPSEN machines are supplied with EU conformity documentation and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.

What are the payment, lead time and warranty terms?

Payment is 30% T/T deposit with the balance paid before shipment; an irrevocable L/C at sight is also accepted. Quotations are FOB Qingdao and valid for 30 days. Lead time is 15 days for standard models and 30 days for customised configurations, counted from receipt of deposit. The complete machine carries a 12-month warranty from commissioning, and wear parts such as jaw plates carry 6 months with a typical service life of 800-1,200 hours depending on the feed material. Full terms are on our trade terms and service.

Is the UTS250 named in the EU conformity documents?

The UTS250 is not individually named in the conformity documents we currently publish, so we do not claim coverage we cannot show. Tell us your destination market and we will confirm in writing which document applies to this model before you order. The documents we do publish are listed on our certifications and compliance page.

Do you send an engineer for installation and operator training?

Yes. On-site installation, commissioning and operator training are available. Travel and accommodation are charged at cost and there is no separate service fee. Tell us the site location and we will estimate the number of days.